Installation Warnings - Phoenix Gold Z Serie Mode D'emploi

Z-Series Amplifiers

Installation Warnings

1. Ensure the +12V lead is disconnected from the battery before you
connect any new equipment
2. Ensure that the amplifier mounting location and holes will not interfere
with the petrol tank, brake lines or electrical wiring.
3. Ensure the amplifier is securely fastened to the vehicle to prevent the
amplifier moving and causing damage in the event of an accident
4. Ensure all wiring is protected from sharp objects and from pinching or
crushing which could result in damage to the audio system
5. Ensure the mounting location has sufficient air flow around the
amplifier. If the amplifier is mounted in an enclosed space a 3" fan
with ducting should be used to assist with cooling.
6. Do not mount any amplifier on a subwoofer enclosure as extended
exposure to vibration may cause damage to the amplifier.
7. Ensure the minimum recommended gauge wire/cable or larger for all
amplifier connections
8. Appropriate mounting is very important for prolonged life
expectancy of any amplifier. Select a location that provides
protection from moisture. Keep in mind that an amplifier should never
be mounted upside down. Upside down mounting will compromise
heat dissipation through the heat sink and could engage the thermal
protection circuit.
Z150.2 - Z300.1 - Z300.4 - Z600.5 - Z1000.1
© 2017 Phoenix Gold • www.phoenixgold.com