Drilling/Impact Drilling; Maintenance, Cleaning And Storing - Westfalia 85 93 08 Mode D'emploi

Drilling/Impact Drilling

The drilling/impact drilling selector (4) may only be operated
when the motor is at a complete standstill. This selector is
located on the top of the impact drill.
For impact-drilling push the switch towards the hammer icon.
For drilling push the switch towards the drill icon.

Maintenance, Cleaning and Storing

 Always unplug the impact drill before maintaining it.
 Before each use ensure that the ventilation slots are open and
clean.
 Never clean the impact drill with water. Use a soft cloth to
clean the housing. Do not use aggressive chemicals or sol-
vents to clean the machine as these may damage the surfac-
es.
 If the machine works powerlessly and sparking occurs at the
brushes, it may be a sign that the carbon brushes are worn
and have to be replaced. Only have the carbon brushes
replaced by a professional or return the unit to the Westfalia
customer service department. Do not open the housing. Do not
try to repair it yourself.
 If the keyed drill chuck became damaged, do not try to repair it
yourself. Have it replaced by a professional only or contact the
Westfalia customer service.
 Store the impact drill indoors in a dry place that is protected
from dust, dirt and extreme temperatures.
 Store the device out of reach of children.
Operation
19