Maintenance - Sima STAR-16 GO Manuel D'utilisation Original

9. MAINTENANCE.

1 First oil change after 1000 hours of use if mineral oil is used and then again after 3000/4000 hours if the oil
used is synthetic or after 3 years of use if these hours aren´t reached. If synthetic oil is used, change oil after
20,000 hours.
2 Grease the holes where the pins and mandrels go and also the bottom of the pins and mandrels, this will also
help avoid build up of rust.
3 At the end of the day disconnect the machine.
4 Cover the machine at night to protect from rain.
5 When possible, remove debris from the inside of the machine.
6 Clean the exterior and grease pins and mandrels frequently.
7 Check oil level in the gear box (every month) if the level has gone down be sure to fill up.
19
ENGLISH