Battery Installation - SoundLogic 17939 Manuel D'instructions

10 Next track / Volume increase
11 Light mode ‐ SMOOTH
12 Light mode ‐ FADE
13 Light mode ‐ STROBE
14 Light mode – FLASH
15 White light
Battery Installation
In first time use, remove the insulation tab from the battery compartment of the Remote Control.
Remote Control includes the battery (1 CR2025/32 Lithium battery); when battery is drained, replace
battery as below:
Pull the battery tray out of the battery compartment of Remote Control.
1.
Place new CR2025/32 button cell battery in the tray slot, as per the indicated polarity.
2.
Close the battery tray.
3.
INSTRUCTIONS FOR USE
1. Screw and secure the Bulb into a E27 lamp socket (with input source AC 120 60Hz).
2. Turn ON/OFF the input to turn ON/OFF the bulb.
Short press the button to the next track
Long press will increase the volume
Smooth color changing light
Fade color changing light
Strobe color changing light
Rapid flash color changing light
To change to white color LED light
4