INTrODUCTION
Thank you for your purchase of a Orion Cobalt power amplifier . Each Orion Cobalt amplifier is
designed to be the leader in its class offering the most power, advanced features, and extreme
ease of use . In high-end sound systems or high SPL systems, Orion Cobalt amplifiers will give you
years of trouble-free performance .
CO300.2 - 150 Watt - two-channel Class A/B amplifier with built-in fully variable high
●
and low-pass crossover . The CO300 .2 is capable of one-channel operation with a maxi-
mum power of 300 W into 4 ohms .
CO600.2 - 300 Watt - two-channel Class A/B amplifier with built-in fully variable high
●
and low-pass crossover . The CO600 .2 is capable of one-channel operation with a maxi-
mum power of 600 Watts into 4 ohms .
The installation of all Orion Cobalt components will determine the overall performance result .
Improper installation will not only limit the performance of your Orion Cobalt system but also
potentially compromise the reliability of this amplifier . To ensure proper sonic results and com-
ponent reliability, please refer to your authorized dealer for installation assistance or advice . If
you decide to perform the installation yourself, be sure to read the entire manual before begin-
ning the installation .
WHAT'S IN THE BOX
() Amplifier
●
(2) Spare fuse(s)
●
(4) #8 self-tapping black Phillips head pan head screws
●
() Amplifier installation and operation manual
●
PrACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 00dB may cause permanent hearing loss .
High power automotive sound systems can generate sound pressure levels in excess of 30dB .
When playing your system at high levels, please use hearing protection and avoid long term
exposure .
Model:
Serial Number:
Date of Purchase: __________________________________________________
2
__________________________________________________
__________________________________________________
© 2007 directed electronics—all rights reserved