Charging A Battery Pack; Led Indicators - Craftsman VersaStack CMST17510 Guide D'utilisation

CHARGING A BATTERY PACK

The VERSASTACK™ RADIO + CHARGER includes a large storage compartment. This
compartment also stores and protects the AC/DC power adaptor when not in-use.
1. Open the compartment to take out the AC/DC power adaptor (see Figure 1 and Figure 3).
Plug the charger AC/DC power adaptor into an appropriate outlet and connect it to the
2.
VERSASTACK™ RADIO + CHARGER power-in port before inserting the battery pack.
The main adaptor indicator LED will light in red.
3. Open the appliance cover by releasing its locking latch.
Insert the battery pack (not included) into the radio, making sure the pack is securely held in the
4.
receptacle (Figure 3). The battery indicator LED will blink continuously, indicating that battery charging
is in process.
The main adaptor LED lights in red. The battery indicator LED will light in accordance with battery
charging status (Green, Yellow, Red).
 NOTE: Close the cover and check it is tightly closed.
5. The charging completion will be indicated by a steady battery indicator LED. The pack is fully charged
and may be used at this time or left in the charger.
HOT/COLD PACK DELAY
When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold Pack
Delay, suspending charging until the battery pack has reached an appropriate temperature.
The charger then automatically switches to the pack charging mode. This feature ensures maximum battery
pack life.
ELECTRONIC PROTECTION SYSTEM
Li-Ion tools are designed with an Electronic Protection System that will protect the battery pack against
overloading, overheating or deep discharge. The tool will automatically turn off if the Electronic Protection
System engages. If this occurs, place the lithium-ion battery pack on the
charger until it is fully charged.

LED INDICATORS

A three-color LED indicates the battery pack status
Green
Yellow
Red
Slow Blink & Mains
Adaptor LED is on
Fast Red Blink
A red LED indicates battery Mains Adaptor
red
Battery LED
Battery pack is fully charged
Battery pack is partially charged
Battery pack needs to be charged
Battery is charging
Error / Faulty battery pack
Mains Adaptor LED
Mains Adaptor Connected
EN EN
15