Publicité
Les langues disponibles
Les langues disponibles
1 A
Using a stud finder, locate 2 wall studs that are 48" center to center apart. Using a pencil,
mark the top mounting hole centers 48" apart. Make sure holes are level and the
same distance from the floor. Pre-drill the 2 marked holes using a 3/16" (5 mm) drill bit.
Left
1 B
Fasten Side Frames(A) to pre-drilled holes
(11 mm) nut driver or socket wrench making sure mounting plates are to the inside.
Do not fully tighten at this time.
Approximate Assembly Time: 30 minutes or less
M OU N T I N G T H E SI DE FRA M ES
TO T HE WA L L ST U DS
Mounting
Plates to
the inside
48"
Right
with 1 Lag Screw(B) in each using a 7/16"
Publicité
