Otto VREB7509-6 Manuel D'utilisation page 60

Function Description
Adjusting the Time of Day
When the oven is switched on for the first
time after installation, "0.00" will flash on
the display. Press the "M" sensor button, or
the "+" and "-" buttons simultaneously. The
colon ´:` on the display will flash. You can
adjust and set the time of day using the "+"
and "-" sensor button. The time must be set
to enable use of the oven functions.
Adjusting the Cooking Time
Adjusting the Minute Minder
To set a Minute Minder timer, press the
alarm sensor button " ", "0.00" will appear
on the Timer display and the " " symbol
will flash. Use the "+" and "-" sensor buttons
to adjust the desired warning time period
while the " " symbol is flashing. Once you
have completed setting the time period,
wait until the " " symbol stops flashing and
remains illuminated. The audible warning
time will be set.
When the timer reaches zero, an audible
warning will sound and the " " symbol will
flash on the screen. Pressing "+" or "-" will
stop the audible warning and the symbol
will disappear from the screen.
Adjusting the Cooking Duration Time
This function helps you to cook for a
fixed period of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature. Press the "M" sensor until
you see the Duration Time symbol "I>I"
and "AUTO" appear on the Timer display
Mode key
Alarm key
Time setting key
Time setting/Temperature
settings for meat probe/ Key
lock key
Oven function display
Timer display
Temperature display
screen. Set the required cooking period
using the "+" and "-" sensor buttons while
the timer is in this position. When you
have completed the adjustment, wait until
the current time of day is displayed on the
screen and until the Duration Time symbol
remains illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and "AUTO" will flash on the screen. Press
any sensor button on the control unit to stop
the warning sound, "AUTO" will continue
to flash. Press the "+" and "-" buttons
simultaneously to exit "AUTO" mode.
Adjusting the Cooking End Time
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Press the "M" sensor button until you see
the Duration Time symbol "I>I" and "AUTO"
appear on the Timer display screen. Set
the required cooking period using the "+"
and "-" sensor buttons while the timer is in
this position. Then, press the "M" sensor
button until the ">|" symbol is displayed,
the time of day and the Cooking Duration
Time symbol will flash. Adjust the cooking
finish time using the "+" and "-" buttons
while the timer is in this position. When
you have completed the adjustment, wait
until the current time of day and ">|" remain
illuminated on the Timer display.
The oven will calculate the operating time
by deducting the cooking period from
the set finishing time, at which it will stop
operating. The timer will give an audible
warning and "AUTO" will continue to flash.
Press any timer button to stop the warning
sound, and press the "+" and "-" buttons
simultaneously to exit "AUTO" mode.
Digital Timer Sound Adjustment
Press and hold the "-" sensor button until
you hear an audible 'beep' sound. After
this, each time the "-" button is pressed, a
different 'beep' tone will sound. There are
three different types of sound. Select the
desired tone and do not press any other
buttons. After a short time, the selected
warning sound will be saved.
Key Lock Function
The key lock is used to avoid unintentional
changes being made to the oven settings.
Press and hold the "+" button until you see
the key lock symbol on the display screen.
EN - 60