Installing Or Removing Battery Pack - EDM Product 08767 Manuel D'instructions

INSTALLING OR REMOVING BATTERY PACK

ES
· Always switch off the tool before insertion or removal of the battery
cartridge.
· To remove the battery cartridge, withdraw it from the tool while
PT pressing the buttons on both sides of the cartridge.
· To insert the battery cartridge, align the tongue on the battery
cartridge with the groove in the housing and slip it into place.
Always insert it all the way until it locks in place with a little click. If
EN
not, it may accidentally fall out of the tool, causing injury to you or
someone around you.
· Do not use force when inserting the battery cartridge. If the cartrid-
ge does not slide in easily, it is not being inserted correctly.
FR
Switch action
CAUTION:
· Before inserting the battery cartridge into the tool, always check to
see that the switch trigger actuates properly and returns to the
"OFF" position when released.
· When you start the tool, just press the trigger. When the trigger is
released, the tool stops.
· Keep the trigger by the end, and then the self-locking button, and
then to loose the trigger to loosen the lock button to lock up the
trigger, the tool is in running state, the state to trigger can make the
lock button pop-up, so as to remove lock state.
Air volume adjusting dial
· When the trigger is fully pressed, the rotary adjusting dial can
adjust the blast volume to any of the seven Settings.
CAUTION:
· If the tool is operated continuously until the battery cartridge has
discharged, rest the tool for at least 15 minutes before proceeding
with a fresh battery.
Rotation
· Press the rotating button machine can turn， Has rotated 90° and
180° two rotating stall.
· Will rotate button press, then rotate hand machine outlet, then
begin to spin and loosen the rotate button, continue to rotating
machines when they hear a faint "click" sound and rotate button
back, rotating machine in place at this time, in accordance with the
above method can make the machine rotating back gear or under a
set of rotating stall.
Instruction manual Ref. 08767