Buffalo filter VisiClear Manuel De L'opérateur page 17

All manuals and user guides at all-guides.com
If this message occurs, it is appropriate to notify BioMed or contact BUFFALO FILTER® to
arrange service of the VisiClear™ system. The system will continue to operate by pressing the
check mark button unless a fatal condition has taken place with the motor. If the system does
not respond after the check mark button is pressed, contact BioMed or BUFFALO FILTER® to
arrange service of the VisiClear™ system.
Buffalo Filter's contact information can be located by pressing the question mark button located
on the lower left section of each of the warning screens as well as the lower left portion of the
main screen. See Figure 17.
Figure 17.
SERVICE AND CONTACT
Should you need to contact BUFFALO FILTER® for service or other customer support needs,
simply press the button shown in Figure 11 from any of the three warning screens or from the
main operating screen and the following information will appear. See Figure 18.
Figure 18.
SETTINGS
The VisiClear™ Surgical Smoke Plume Evacuator is flexible in its user settings and can be
customized in a number of fashions. As explained in the Filter Life Indicator section above,
filter life can be displayed in both hours and minutes or as a percentage of remaining life.
Simply press the Settings Button shown in Figure 5 and press the % 0:00 filter setting button
to toggle between time and percentage filter life display. See Figure 19.
Figure 19.
Buffalo Filter® VisiClear™ Operator's Manual 17