VERTBAUDET 70328-0242-6350 Mode D'emploi page 7

You can set a wake-up time and a bedtime. Half an hour before the wake-up time, the dial lights up yellow and turns green when it is
time, and half an hour before bedtime the dial lights up blue.
27- Press the "set" button C. The word "set" appears on the screen.
28- Press the "sleep/wake" button H to set the bedtime mode; stars appear on the screen.
29- Press B buttons "+" and "-" to set the hour.
30- Press the "sleep/wake" button H then the C buttons to set the minutes.
31- Press the "sleep/wake" button H to set the day mode; a sun and clouds appear on the screen.
32- Press B buttons "+" and "-" to set the hour.
33- Press the "sleep/wake" button H then the C buttons to set the minutes.
34- Press "set" button C to exit day/night mode or press "sleep/wake" button H to return to the start of the setting.
To activate or deactivate this function, press the "sleep/wake" button H.
Button I: Music tuning
The device can play three melodies, four natural sounds and one white noise. Playback can run continuously or stop automatically after
a set time.
In normal mode, press the "SOUND" button I: audio playback starts. Press SOUND repeatedly to
Select the desired sounds (8 sounds).
5- Press the "set" button C. The word "set" appears on the screen.
6- Press the "sound" button I. The screen displays "10"
7- Press B buttons "+" and "-" to adjust the duration of the sounds. Duration options are 10 mins / 20 mins / 30 mins / 45 mins /
1 hour / 1 hour 30 mins / continuous ("ON")
8- Press the "set" button C to exit sound mode or press the "sound" button I to return to the start of the setting.
If you select "ON", the selected track will NOT automatically turn off later, and must be ended manually by pressing the SOUND button.
Press SOUND to start playback. Playback stops after the set time has elapsed.
Or press SOUND to stop playback before the end of the set time.
The following functions are now available:
Press SNOOZE/LIGHT: the alarm melody/ights turn off for 10 minutes then turn on again. This procedure can be repeated several times.
If you press and hold SNOOZE/LIGHT for 2 seconds. the snooze function will be deactivated.
Press the NAP alarm/light button; the nap timer is turned off.
Wait 5 minutes. The alarm/light turns off automatically; the nap timer is turned off.
Battery installation and replacement:
This item is mains operated and contains a backup battery (CR2032) for memory only.
To insert or replace the batteries, please follow these instructions:
- Take a Phillips screwdriver
- Unscrew the screw
- Remove the battery compartment cover by turning it clockwise
- Insert the batteries in the compartment respecting the polarities: "-" against the spring and "+" upwards
- Replace the battery compartment cover and turn counterclockwise
- Screw again
- Help protect the environment by returning used batteries to a collection centre.
On delivery, this back-up battery is already inserted and fitted with a protection to prevent premature discharge.
Remove this protection from the button cell battery before turning on the clock.
Battery :
Batteries (non-rechargeable) must not be recharged. Different types of batteries or new and used batteries must not be mixed. The
batteries or accumulators must be installed respecting the polarity. Used batteries or accumulators must be removed. The terminals of
a battery or an accumulator must not be short-circuited.
If the batteries have leaked, remove them from the battery compartment with a cloth. Rinse affected areas immediately after contact
with acid and wash thoroughly with clean water. Consult a doctor if necessary.
Information to be kept.