Activate/Deactivate The Alarm - VERTBAUDET 70328-0242-6350 Mode D'emploi

12- Press the "time" button D. The minute digit flashes on the display.
13- Press B buttons "+" and "-" to set the minutes.
14- Press the "time" button D. 12 Hr or 24 Hr appears on the screen.
15- Press B buttons "+" and "-" to switch between 12 Hr or 24 Hr mode.
16- Press "set" button C to exit the time setting mode or press "time" button D to return to the beginning.
The "time" button D is also used to adjust the screen brightness. Press button D to adjust the screen brightness. There are 4 screen
brightness levels
Button E: Setting the alarm
10- Press the "set" button C. The word "set" appears on the screen.
11- Press the "alarm" button E. The Alarm 1 symbol appears on the screen and the time flashes.
12- Press B buttons "+" and "-" to set the hour.
13- Press the "alarm" button E. The minute digit flashes on the display.
14- Press B buttons "+" and "-" to set the minutes
15- Press the "alarm" button E. A number appears on the display, e.g. "1".
16- Press the B buttons "+" and "-" to choose from 5 alarm sound options.
17- Press "set" button C to exit alarm setting mode or press "alarm" button E to set alarm 2.
18- To set alarm 2, refer to the alarm 1 setting steps.

ACTIVATE/DEACTIVATE THE ALARM

Press ALARM repeatedly to activate or deactivate the alarms in the following order:
Alarm 1 activated -> Alarm 2 activated -> Alarm 1 & Alarm 2 activated -> Alarm deactivated
The alarm symbol appears when the alarm is activated.
Hold the SNOOZE/LIGHT button for a few seconds; the last alarm 1 and 2 time will be displayed on the screen.
There are 3 options to deactivate the alarm by the child:
Press SNOOZE/LIGHT; the alarm sound will stop playing. After 10 minutes, the alarm will ring again. This procedure can be repeated
several times.
Hold down the SNOOZE/LIGHT button for 2 seconds to deactivate the snooze function.
The alarm symbol remains visible on the screen and you will be woken up at the same time the next day.
Press the "alarm" button E until the alarm symbol disappears from the screen.
Wait 5 minutes, the alarm stops automatically. The alarm symbol remains visible on the screen and you will be woken up at the same
time the next day.
Button F: nap timer
18- Press the "set" button C. The word "set" appears on the screen.
19- Press the "NAP" button F. The display shows "10" and the clock symbol.
20- Press B buttons "+" and "-" to adjust the duration of the nap. Duration options are
10 mins / 20 mins / 30 mins / 45 mins / 1 hour / 1 hour 30 mins / continuous ("ON").
21- Press the "NAP" button F. "AL" or "LI" appears on the screen. Press the B buttons to select the desired wake-up mode:
AL Melody
LI Red light
22- Press the "set" button C to exit the nap timer mode.
To activate or deactivate the nap timer, press the NAP button F. The nap timer icon will appear when the nap timer is on. When the set
time arrives, an alarm melody will sound or the dial will light up red for 5 minutes. The clock symbol also flashes on the display.
Button G: Night light
The night light can be turned on continuously or turn off automatically after a certain time.
Press button G to turn on the night light, and press several times to select the desired light (5 lighting colours).
23- Press the "set" button C. The word "set" appears on the screen.
24- Press the "light" button G. The display shows "10".
25- Press buttons B "+" and "-" to set the night light duration. Duration options are
10 mins / 20 mins / 30 mins / 45 mins / 1 hour / 1 hour 30 mins / continuous ("ON").
26- Press the "set" button C to exit light adjustment mode or press "light" button G to return to the start of adjustment.
Press the SNOOZE / LIGHT button to adjust the brightness. The night light has 3 levels of brightness.
To activate or deactivate the night light and also to change the night light colour, press LIGHT.
Button H: Setting the day/night function