VEDETTE VCAVE58DZ Manuel D'utilisation page 39

Setting the temperature control
Each cooling compartment of the Wine Cooler (upper and lower) is
independently controlled. Connect the power cord to a properly grounded
outlet before setting the temperature.
Light
Fahrenheit/Celsius interchange
Press the key, turn on or turn off the LED lights inside.
This unit has the option to display temperatures in either Celsius
or Fahrenheit. To change the setting, press and hold button (
simultaneously for approximately 3 seconds.
UP
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press
increase 1℃. Regular flash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual temperature
inside.
The temperature setting can be adjusted from 5
Down
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press
reduce 1℃. Regular flash quit after 5 seconds detecting no press and new
set temperature save. LED display return to show actual temperature
inside.
The temperature setting can be adjusted from 10
LED light replacement
Warning: the LED light must not be replaced by the user!
If the LED light is damaged, contact an authorized service
representative for repairing.
The product contains a light source of energy efficiency class N/A.
℃
℃
EN-13
)
℃
to 10
℃
to 18 .