Product Diagram; Charging The Power Bank - Ravpower LUSTER Serie Mode D'emploi

Product Diagram

① Power Button*
② Input port (DC 5V/2A Max)
③ Output port (DC 5V/2.4A Max)
④Power Indicator*
* Power button
Press power button once to start charging when connected with
your mobile devices. The power bank will automatically turn off in
30 seconds after your device is fully charged.
* Power indicator
Indicator
Three LED ON
Two LED ON
One LED ON
03
Battery Level
> 65%
35% - 65%
< 35%

Charging the Power Bank

Use the charging cable to connect the power bank to any active
USB port or USB charging adapter. Charging will start automatically,
and stop when the power bank is fully charged. Battery level
indicator will have all 3 LEDs on and turn off automatically when
disconnected.
AC adapter
110v~220v
Computer USB port
Charging your device
Connect the power bank to your device using the USB charging
cable or your own original cable. Charging will start automatically
and stop when your device is fully charged (press the power button
once if charging does not start automatically).
04