Unplug the appliance from the electrical outlet
immediately after using and / or before touching any
accessory, especially the blades. If some food stops the
blades before removing it, unplug the unit from the
electrical outlet.
Do not insert hot food (maximum temperature 40 C).
Not exceed the maximum capacity for ingredients as
indicated in the Operating section.
At the end of processing, wait for the blade to completely
stops before removing the food from the glass container.
When finished using the unit, it is advisable to wrap the
power cord so as to ensure a better cleaning, avoiding any
risk of damage.
When mincing fruits, remove pit and/or any tough rind
For cleaning, we recommend using warm water only,
limiting the use of detergents. In this case, rinse the part
profusely. Do not immerse the motor unit in water or
other liquids; clean it with a damp cloth.
Caution: blades are very sharp; pay attention not to
cut yourself while removing the attachment or during
cleaning operations.
DESCRIPTION TR01
1. Main body
4. Transparent container
OPERATING THE UNIT
Assembling the unit by following the steps as shown besides.
1)
Insert the rostrum (6) in the container (4) without touching the blades.
2)
Insert the food without exceeding the maximum capacity.
3)
Fit the support (3) on the glass container properly.
4)
Fit main body (1) properly over the support (5).
5)
Plug the unit and push the head of the appliance (2) to turn it on.
The use is safe, because as soon as the main body is removed from container, blades will stop turning.
FIRST USE
Removing and assembling the glass container a few times without plugging it or adding any fruits or
vegetables. Follow this step to practice with the appliance. Wash the lid and the jug with warm water and
dishwashing liquid. Other accessories made of electrical parts, such as the motor block and the main body
must be cleaned with a damp cloth and dry immediately.
2. ON/OFF button
5. Power cord
3. Support
6. Rostrum with blades
10