Connection; Hera - RayLight STROBES Fiche Technique

2.3.

Connection

Connection
2.3.1.
Insert the wires into the holes of the corresponding terminal block and tighten the Insert the wires into the holes of the corresponding terminal block and tighten the Insert the wires into the holes of the corresponding terminal block and tighten the
screws. No solder is necessary. screws. No solder is necessary.
Wiring Diagram
RAYLIGHT TECHNOLOGIES RAYLIGHT TECHNOLOGIES
Aérodrome du Versoud
38420 LE VERSOUD

HERA

Generator
Internal
FTECH-2022-000002-V7 FTECH
Last Update: 11/10/2022 Last Update: 11/10/2022
Page 13/31