Charge Status - GLO HyperX2 Notice D'utilisation

67

07 Charge Status

To check the charge status, press and release the
control button on the glo™ tobacco heater. The status
of the charge level cannot be checked during a
session.
See instruction 1 for further information on charging.
Charge Status
EN
Low charge, charging
required
25% power remaining
50% power remaining
75% power remaining
100% power
08 Clean
Ensure the glo™ tobacco heater has been allowed to
cool for a minimum of 5 minutes before cleaning.
Open the cleaning door at the bottom of the glo™
tobacco heater. Use a tissue to wipe away any
collected moisture from the bottom of the device and
cleaning door.
For best performance, moisture at the cleaning door
and bottom of the glo™ tobacco heater needs to be
removed after every 5 sessions.
After x5
sessions
To clean the inside of the heating chamber, open the
shutter door at the top and the cleaning door at the
bottom of the glo™ tobacco heater.
Clean the heating chamber using the brush provided.
For best results, clean from both ends as required.
For best performance, the glo™ tobacco heater
cleaning chamber needs to be cleaned after 20
sessions.
68
EN