Steamery Cumulus 3 Mode D'emploi page 4

Assemble Your Steamer
1. Assemble the rod set. The thinnest rod part is the top part
2. Attach the assembled rod to the center of the steamer
3. Attach the hanger and hook at the top of the rod.
4. Attach the steam head to the hose
5. Hang the steam head on the hook
6. Attach the hose firmly to the steam outlet on the top of the steamer in front of the rod.
Start Using Your Steamer
Using Your Steamer
1. Place the steamer on a flat wet-protected surface where you plan to use it. Take out the
water tank and unscrew the cap.
2. Fill the tank with 500 – 1800 ml of water. Replace the tank. If you tilt the steamer it may
leak water.
3. Turn on Cumulus No.3 Home Steamer by switching the on/off button to level one for light
steam power (30 g steam/min) and to level 2 for max steam power (38 g steam/min) notice
the green light indicator. Wait 45 seconds.
4. Start steaming (avoid starting the steamer with an empty tank).
5. Turn off Cumulus No.3 Home Steamer by switching the on/off button to level zero (the
green light indicator goes off).
6. Do not leave your steamer filled with water. In rare cases it may leak. Steamery does not
take any responsibility for any wet damaged floors or interior.
Steam Your Garments
Steaming your clothes is easy and you will find your own way. Here are some of our
recommendations.
1. Hang your garment on a separate hanger.
2. Push the steam head firmly against the fabric while steaming.
3. You may stretch the fabric while letting the hot steam pass through it.
4. For sensitive fabric such as silk or wool, we recommend you to attach the fabric brush on
to the steam head (included in the package).
5. To keep the fabric straight you may want to hold the fabric while steaming. Use the heat
glove to avoid burning yourself (included in the package).
Empty And Clean Your Steamer
When water is converted into steam, residues of calcium and magnesium gather in the boiler
inside your steamer. When the steamer has been used for a while, these residues form a coating,
which may reduce the efficiency of or even break your steamer.
Therefore, it is important to clean your steamer. We recommend that you descale it after every
20th used water tank.
Descaling liquid is an acid that dissolves magnesium and calcium. By pouring descaling liquid (or
any other similar acid as ex white distilled vinegar) and hot water inside the boiler you will clean
your steamer from these residues.
Clean your steamer by following the elements below:
1. Remove the tank and the hose.
2. Empty the steamer through the steam outlet.
3. In the cavity under the tank, pour 50 milliliters of white distilled vinegar and 100-200
milliliters of hot water.
4. Tilt your steamer back and forth. When you tilt the steamer you will see brown pieces of
magnesium and calcium in the water.
5. Pour out the water through the steam outlet or tilt the steamer to the side.
6. Follow this procedure a couple of times until the water is clear and no more brown pieces
can be seen in the water.
2