Removing The Battery Pack; Charging The Battery Pack - Toro PowerPlex 51491 Mode D'emploi

Taille-haie 61 cm (24 po) 40 v max
Masquer les pouces Voir aussi pour PowerPlex 51491:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing the Battery Pack

Press the battery latch on the tool to release the
battery pack and slide the battery pack out of the tool
(Figure
7).
1. Battery latch
Figure 7

Charging the Battery Pack

Important:
Read all safety precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1.
Make sure that the vents on the battery are clear
of any dust and debris.
2.
Line up the cavity in the battery pack
with the tongue on the charger.
g194190
1. Battery pack cavity
2. Battery pack terminals
3. Battery pack venting areas
3.
Make sure that the vents on the battery charger
are clear of any dust and debris.
10
Specifications (page
Figure 8
4. Battery-charge-indicator
button
5. LED indicators (current
charge)
8).
(Figure
8)
g228487

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Powerplex 51491tPowerplex 245149151491t

Table des Matières