BECKER-Antriebe SWS52 Informations Techniques page 4

Technical Information
Commissioning SWS52
Operating
mode
M
TIME / DATE
SC81
SETTING
connected ?
SUN
SUN
Operating mode
M
TIME / DATE
until
WIND
SETTING
MONITORING
4
Setting the sun and wind thresholds
Setting the sun threshold
1. Press the MENU button.
2. To select the SETTING menu, press the + button until
3. Confirm with OK
You will only see this interactive window if a light sensor
is connected.
4. SUN t appears.
2x MENUbutton
5. Adjust the sun threshold using the +/- button (the two
6. Confirm your setting with OK.
7. SUN s appears.
8. Adjust the sun threshold using the +/- button (the two
9. Confirm your setting with OK.
10. Now press the MENU button twice to switch to the
Setting the wind threshold
1. Press the MENU button.
2. To select the SETTING menu, press the + button until
3. Press OK until the menu item WIND MONITORING
4. Adjust the wind threshold using the +/- button (the two
2x MENU button
5. Confirm your setting with OK.
6. Now press the MENU button twice to switch to the
SETTING appears.
Note
digits on the left side of the display show the current
value).
digits on the left side of the display show the current
value).
operating mode.
SETTING appears.
appears.
digits on the left side of the display show the current
value).
operating mode.
de en fr nl
Becker-Antriebe GmbH
35764 Sinn/Germany
www.becker-antriebe.com