Publicité
Les langues disponibles
Les langues disponibles
CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh
Settings in the setup menu
In the standard display, press the SET button to enter the setup menu. Press the START / STOP button to exit the setup menu at
any time.
Batch value setting
The first setting in the setup menu is the point under which you can specify the batch value / counting stop for the individual coin
boxes. The following is displayed: the upper value indicates the value of the selected coin, the lower value is the set count stop at
which the machine should stop counting. The value zero means that no counting stop is desired.
0.01
€
BAT
0
No batch stop at 1 Cent coin
Press the PRINT key to toggle between the counting stops of the individual coin types. Use the "+" and "-" buttons to adjust the
values. If you press and hold the "+" or "-" buttons, the value will be increased/decreased in steps of 10 steps. Press the CLEAR
key to delete a set count stop. Press and hold the CLEAR button for approx. 2 seconds to clear all set count stops.
After making the desired settings, press the START/STOP key to return to the standard display.
The batch function can be activated and deactivated from the standard display by pressing the "+" key.
The active batch function is indicated by "BAT ON" in the display.
If the counting stop of a coin type is reached, the machine stops the counting process and you receive the following display:
2.00
€
BAT ON
30
Counting stop at 2.00 Euro of 30 coins reached
Press the START / STOP button to resume counting.
0.02
€
BAT
50
Counting stop after 50 coins of 2 Cent
Publicité
