Madas FRG/2MBC Mode D'emploi page 18

10.0 - WARRANTY
The warranty conditions agreed with the manufacturer at the time of the supply apply.
Damage caused by:
• Improper use of the device;
• Failure to observe the requirements described in this document;
• Failure to observe the regulations pertaining to installation;
• Tampering, modification and use of non-original spare parts;
is not covered by the rights of the warranty or compensation for damage.
The warranty also excludes maintenance work, the assembly of parts or non-original spare parts, making changes to the
device and natural wear.
11.0 - RATING PLATE DATA
Mod.: FRG/2MBZ DN 25
Pa: 20-30 mbar Wdso:40-90 mbar
Wdsu:10-30 mbar DfRv:10-60 mbar
year: 2018
The rating plate data (see examples above) includes the following:
• Manufacturer's name/logo and address (possible distributor name/logo)
• Mod.:
• PS
• Pe
• TS
• Pa
• Wdso
• CE-51BT3739 (if it is present) = certification pin number
• AC
• SG
• AG
• EN 88-2
• Wdsu
• DfRv
• year
• Lot
• U1823
• 14216
• 00001
•
• (if it is present)
•
FRG/2MBC(Z-F-R-M) - FRG/2MB(Z-F-R-M)
Lot:U1823 14216/00001
= name/model of the device followed by the connection diameter
= Allowable pressure
= Maximum pressure or inlet pressure range that product operation is guaranteed at
= Temperature range that product operation is guaranteed within
= Outlet pressure range
= OPSO calibration range that can be achieved with the spring provided (without replacing any part)
= Accuracy class Pa
= Closing pressure class
= Overpressure shut off accuracy unit
= Product reference regulation
= UPSO calibration range that can be achieved with the spring provided (without replacing any part)
= Differential relief valve range with respect to Pa
= Year of manufacture
= Product serial number (see explanation below)
= Lot issued in year 2018 in the 23
= progressive job order number for the indicated year
= progressive number referring to the quantity of the lot
= In compliance with ATEX Dir. followed by the protection mode
= Compliance with (EU) Regulation 2016/426 followed by the no. of the Notified Body
= In compliance with PED directive followed by the no. of the Notified Body
Via Moratello, 5/7 - 37045
Legnago (VR) - Italy
www.madas.it
PS=Pe:0,5-5 bar
CE-51BT3739 AC10 SG30 AG10 EN 88-2
II2G
II2D
week
rd
18
Madas Technical Manual - 5|5.1b - REV. 1 of 20
TS: -20+60°C
0051
0497
th
Feb 2020