Tequipment NGD8800 Mode D'emploi page 5

NGD8800-Manaul-FINAL-031108
Note: Battery must only be
charged or replaced in an area
known to be non-hazardous.
Make sure the charger plug
is completely plugged into
the unit.
CAUTION
1. Do not use the instrument in an area of extremely high level of
combustible gas.
2. The gas/vapor of organic solvent might interfere with the function
of the unit. During detection,please eliminate the influence of the
organic solvent.
3. In order to ensure correct operation and indication, the unit should
be switched on and warm-up in non-contaminated atmosphere.
4. Charge the unit at least 16 hours before it is used. If it is not used
for a long time, the unit will take a long time to warm up.
5. Do not charge the battery over 24 hours.
SPECIFICATIONS
Detect Item: Combustible gas
Sensitivity: Variable, as low as 5ppm (gasoline)
Response Time: Instantaneou
Warm up time: <110 second (in 25°C, 60%RH
Continuous operation time: Up to 2 hours (slightly vary with operation)
Low battery indication: 5±0.3V
Operation temperature: 0° to 110°F (0° to 52°C)
Power supply: 1200mAh, 6V Ni-MH rechargeable battery
Weight/Size: 17.4 oz. (492 g); 9.3"x3.4"x1.8" (235 x 86 x 46 cm)
Standard accessory: (1) Tool box
Insert the plug into the jack of the instrument
(1) Charger: (DC10V AT 240mA LOADING)
3/11/08 2:43 PM
(Figure 2)
Page