How It Works - Tequipment NGD8800 Mode D'emploi

NGD8800-Manaul-FINAL-031108 3/11/08 2:43 PM Page
SOME APPLICATIONS ARE:
• Gas lines and pipes
• Propane gas refill station
• Fuel in marine bilges
• Exhaust and fuel leaks
• Liquid or gas fired heating systems
• Check manholes for safety
Note: Although the unit will respond to high levels of Carbon
Monoxide, it should not be used as a detector for this gas in normal
room or working atmospheres. It is used to pinpoint a leak as
described in the Operating Instructions.

HOW IT WORKS:

After the automatic warm up, when the sensor of the instrument
detects vaporous and gas from combustible compound, the LED signal
will light up and change with the increasing tick rate to locate the
combustible leaks. This helps the user to take effective measures or
actions to clear potential hazard.
FEATURES:
• Leak size indication (Audial and Visible)
• Auto fast warm-up
• Adjustable sensitivity
• Low battery indication
• Rechargeable battery
• Charge protection to prevent overcharge or over current
• Double color LED indicates charge state
• ON/OFF switch
• Sensing tip
• 14" Flexible gooseneck probe - unfasten probe knob to readjust
rotation
Includes: Rechargeable battery, charger and hard carry case