Cleaning And Maintenance - cecotec Twist&Fusion 4000 Luxury Manuel D'instructions

ESPAÑOL
Turn the knob to speed 0 during operation to pause or stop it. When the device is operated
again, the timing will continue.
While the arm is raised (during standby or during operation), the display will show "E01",
indicating that the motor is not working for safety measures. When the arm is placed in its
position again, select the desired speed and the device will turn on again. If the display was
showing time countdown, it will not be reset, it will be saved and resume.
Fig. 6
Countdown function:
The countdown timer is suitable for any recipe that specifies mixing time of ingredients.
To set the countdown timer, rotate the knob anticlockwise for 3 seconds.
The preset time is 2 minutes, displayed as 02:00 on the LED screen.
Rotate the knob clockwise once, time increases 10 seconds, that is 2 minutes plus 10 seconds.
Rotate the knob anticlockwise once, time decreases 10 seconds, that is 1 minute plus 50
seconds.
When the knob is held clockwise, the time will add whole minutes, not in 10-second intervals.
Rotate the knob anticlockwise for 3 seconds, timer is fixed, and timer is well set.
Rotate the knob clockwise to select the speed.
The device will automatically turn off when the timer has finished counting down.
Using the mixing bowl
Fig. 7
Place the mixing bowl on its support and turn it following the LOCK sign to lock it into place.
(1)
In order to lift the drive arm, press the lever downwards in the direction of the arrow. The
drive arm will now move upwards. (2)
Mount the required utensil by inserting the top into the drive shaft and locking the cotter pin
in the shaft by turning it to the right. (4)
Introduce the ingredients. Do not overfill the device. The maximum load is 1.5 kg.
Lower the arm using the lever. (3)
Plug the device into a power supply.
Turn the device on by turning the knob clockwise to the desired speed setting according to
the type of mixture.
28 TWIST&FUSION 4000 LUXURY
Speed levels and use of utensils according to the type of mixture
Levels Utensil
1-3 Kneading arm
3-5 Kneading arm, mixer
6-8 Whisk
Note:
Short operation time: With heavy mixtures, do not operate the machine for more than 10
minutes and then allow it to cool down for 10 min before operating it again.
Use the splashproof cover to protect against liquid mixtures.
Mixing eggs with the whisk requires 3 min.
After kneading/stirring, turn the switch back to the "0" position as soon as the mixture has
formed a ball. Then, remove the mains plug.
Press the lever downwards to raise the arm.
The mixture can now be released with the help of a spatula and removed from the mixing bowl.
Remove the mixing bowl by turning to the left.
Clean all the parts as described in the Cleaning and maintenance section.

4. CLEANING AND MAINTENANCE

Before cleaning the device, make sure that the appliance is disconnected from the mains.
The accessories can be cleaned with soap and water. Try to clean the appliance as soon as
you finish using it, as the dry texture of some food may be difficult to remove.
Clean the surface of the device with a cloth dampened in water.
Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate
the surfaces of the appliance.
If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
Never immerse the device, its motor or cord in water.
After operation, all the accessories should be cleaned as soon as possible in order to avoid the
ingredients from sticking onto the accessories for long time, making it more difficult to clean.
Put the bowl, Kneading arm, mixer, whisk and clean them with a dishcloth or brush. If
necessary, dip them in water for 10 minutes first, it will be easier to clean.
Clean thoroughly the food tray, the blade of the meat grinder and the vegetable cutter.
ESPAÑOL
Mixture
Heavy mixtures (e.g. bread or short
pastry)
Medium-heavy mixtures (e.g. crepes or
sponge mixture).
Light mixtures (e.g. cream, egg white,
blancmange).
TWIST&FUSION 4000 LUXURY 29