Teka RVI 20041 GBK Mode D'emploi page 31

OPERATING YOUR WINE COOLER AND SETTING THE TEMPERATURE
 Control System Instruction

" "
Used to switch the internal light on/off.

" "
Indicator light illuminates to signify the cooling mode is currently in operation.

" "
Press and hold this key to turn the appliance on/off (hold for approx 3 seconds).

" "
This button controls the upper compartment temperature zone.Each press of the button will
decrease the temperature in increments of 1º C. When the temperature reaches the
minimum 5º C it jumps up to the maximum of 10º C.

" "
This button controls the lower compartment temperature zone. Each press of the button will
decrease the temperature in increments of 1º C. When the temperature reaches the
minimum 10º C it jumps up to the maximum of 18º C.

" LED display window "
Display the set temperature in upper compartment.

" LED display window "
Display the set temperature in lower compartment.
 Setting The Temperature Controls
Set the desired cooling temperature by pressing the buttons adjacent to the"
indicators. Each press of the buttons will scroll through the available temperature settings
in increments of 1°C.
Upper compartment: The temperature setting can be adjusted from 5℃ to 10℃.
Lower compartment: The temperature setting can be adjusted from 10℃ to 18℃.

If you want to reveal actual temperature, please press and hold the " UP " or " DOWN "
button for 3 seconds, the LED will flash and display the actual temperature. After stopping
pressing the button for 5 seconds, LED figure will stop flash, then revert back to display the
set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
CONTROL
29
" or " "