Mustang MV-PROJSP-PRO Mode D'emploi

Support
Extension
50mm (x2)
Support
Extension
100mm (x2)
Support Support Extension
Extension
75mm (x2)
150mm (x2)
Spacer Grand (x4)
Spacer Moyen (x4)
Spacer petit (x4)
1.
Desserrer les vis sur les
supports de vulgarisation.
3.
Attah à l'assemblée à monter
de 1,5 "tube et serrer le tube.
4
20mm Rondelle (x2)
M5 x 10mm
Square écrou (x8)
10mm Rondelle (x4)
Socket bouchon
8mm Rondelle (x4)
à vis Bouton
Croix en retrait vis
Spacer basse (x4)
M3 x 15mm/M3 x 20 (x4 ea)
M4 x 15mm/M4 x 20/M4 x 25 (x4 ea)
M5 x 15mm/M5 x 20/M5 x 25 (x4 ea)
M6 x 15mm/M6 x 20/M6 x 25 (x4 ea)
2.
Assembler le montage de la projecteur,
comme indiqué ci-dessous.
4.
Insérez le M10 x 20mm à vis.
MV-PROJSP-PRO
CEILING MOUNT for PROJECTORS
Dimensions: 6" x 5" x 3"
1.5" NPT compatible
Max loading weight: 33lbs.
WARNING:
Please read these instructions before beginning installation, as faulty installa-
tion could result in injury. We assume no responsibility for faulty installations.
Ensure the ceiling can support the total weight of the projector and mount: 33lbs.
All bolts and screws must be used at the designated points in the installtion
instructions to prevent damage to the projector, or personal injury.
DO NOT install near air conditioner vents or where there is excessive dust
or smoke.
Ensure the projector is mounted so that it is not possible for excessive loads to
be placed on the bracket.
HARDWARE KIT
DESCRIPTION QTY
Extension Bracket 100mm
Extension Bracket 50mm
Extension Bracket 150mm
Extension Bracket 75mm
M5 x 10mm Socket Button Cap Screw 4
M3 x 15mm/M3 x 20 4 ea.
M4 x 15mm/M4 x 20/M4 x 25 4 ea.
M5 x 15mm/M5 x 20/M5 x 25 4 ea.
M6 x 15mm/M6 x 20/M6 x 25 4 ea.
DESCRIPTION
2
20mm Washer
2
10mm Washer
2
8mm Washer
2
Bottom Spacer
Large Spacer
Medium Spacer
Small Spacer
Square Nut
QTY
2
4
4
4
4
4
4
8