shark STYLE iQ HD120EU Mode D'emploi page 4

Style Brush
Dry, straighten and shine—all at the same time.
Smoothing Bristles
On the outer edges for grabbing,
smoothing and shining.
Detangling Bristles
In the middle for combing
and detangling.
360° Button
Press and hold, then rotate brush
to your desired angle.
Use Horizontally
For rough drying, finishing,
and shaping your ends.
Use Vertically
For more reach towards
the back of the head.
TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temperature lights will be OFF when Cool Shot is engaged.
5
air temp
Sleek & Shine
Press the Style Brush in horizontal position into the head of the hair dryer until it clicks into place.
START WITH TOWEL-DRIED, DETANGLED HAIR.
Apply hair products or styling agents as desired.
1. Rough dry using the concentrator until 70% dry.
Then pull the brush through hair with the detangling
bristles. Pull through to ends.
3. For smoothing and shining, brush from top to
bottom. Use a rounding motion to engage the
Smoothing Bristles and grab hair.
Pro Tip: Toggle to low airflow and hold ends around
bristles. Set shape by pressing the Cool Shot button.
Product colour may vary.
2. Press the iQ 360˚ button, then turn brush vertically
as desired to maximize reach to the back of your head.
Pro Tip: Section hair as desired, drying underneath first
to build volume at the crown.
4. For volume and shape, scoop from underneath the roots.
Pro Tip: Toggle to low airflow and hold ends around
bristles. Set shape by pressing the Cool Shot button.
6