AFIRE BL40 Manuel D'utilisation page 4

4
* Minimum volume of rooms advised (m3)
Device equipped with an adapter 12 volts - 110/240 V AC 50-60 Hz.
Device equipped with an infrared remote control (Batteries not supplied).
Device equipped with an outside connecting (dry contact) allowing a remote switch On / Off.
Never start an unattended device.
3. PREPARATION OF THE DEVICE BEFORE USE
• Remove the packaging of your device.
• Verify that there is no object in the burner. Remove it if necessary.
• Devices MUST BE mounted on the wall, fixed on the ground or built-in.
.
a) Fireplaces Installation
• A mounting bar with holes is supplied with wall fireplaces.
• Use a spirit level to ensure that the bar is straight; fix it by using appropriate screws according to the
type of chosen wall
• With the help of another person, hang the fireplace in position.
• Check that the fireplace has a right level by using a spirit level.
• For floor mounted devices, fix it to the floor with screws. (4 holes in the bottom of the device).
b) Burners Installation
• Build-in the burners to the frame
• Check that the fireplace has a right level by using a spirit level.
.
4. SPECIAL PRECAUTIONS OF INSTALLATION
• Do not cover the device.
• Do not put objects on the device in functioning.
• Leave a free access to the control buttons
• Do not leave curtains or lace curtains within 1 meter of the device.
• Do not use in a room with a draft.
• Warn the fragile persons in particular the children of the dangers of fire. Never let them approach the
device.
AFIRE 6 London Street, Paddington, W21HR LONDON, UK