Bluetooth Mode - Conceptronic MASSIMO 01 Guide Rapide

English
1. LED Screen.
2. Master Volume
3. TF Port: Play MP3 music from TF card (up to 32GB) (FAT32).
4. USB Port: Play MP3 music from USB storage device (up to 32GB) (FAT32).
5. Previous
6. Play/Pause: In USB/TF card reading status, short press it to play/pause, or long
press it to select one of four playback sequencing modes (All - play all tracks in
sequence; ONE - repeat one track). In AUX input / FM radio status, short press it to
toggle between mute and normal volume.
7. Next
8. Mode/SHIFT: Short press it to toggle between USB/TF and FM receiving modes,
long press it to toggle between recording folder and MP3 folder.
9. Recording/DEL: Short press it to enable recording (USB/TF storage device need
be connected first). During recording, reverberation should be tuned to the
minimum. Long press it to delete a recording file. Recording in AUX or FM mode is
available.
10. Microphone reverberation regulating knob.
11. LINE IN: AUX input
12. DC 9V recharging port.
13. TREBLE: The control knob of treble
14. Recharging indicator light: When recharger is connected, the red light turns on.
When the device is fully recharged, the blue light turns on.
15. Power switch: "
16. EAR MIC: headphone/MIC Port.
17. Microphone volume regulating knob.
18. EAR: headphone port.
19. Microphone input jack
20. : Environment Switching: In USB/TF reading status, short press it to
select an environment mode (Square, Meeting, Home, Hall and Personal) / to
control the flash light switch.

Bluetooth Mode:

 Turn the Power button to "ON".
 Press the Mode button to enter Bluetooth mode, the display screen will show
"BLUE".
 Turn on your iPad, tablet or PC and go to the Bluetooth setting window.
 The Bluetooth device will be showing on the iPad, tablet or PC. Select
"MASSIMO 01".
 Pair your device with the unit. If password is needed, type in"0000".
Previous: to change "Previous music"
Next: to change "Next music"
" - ON; " " - OFF.
4. Installation & usage