RC System Trixx 350BL Mode D'emploi page 3

TRIXX 350 & TRIXX 400
INTRODUCTION
The TRIXX series ESCs is designed to supply high performances to the last generation brushless motors. Thanks
to their special programming features as the timing and cells cut-off identifi cation, the TRIXX ESCs are an excellent
choice for the modern electric fl ight.
General Features
- smart cut-off identifi cation
- auto timing
- programmable brake
- thermal protection
Technical Specifi cations
TRIXX 350
2 3S LiPo / 6-10 cells NiMH
maximum amperage continuous drawn: 35 A
BEC: 5.0 V
battery cut-off: 55%
TRIXX 400
2 3S LiPo / 6-10 cells NiMH
maximum amperage continuous drawn: 40 A
BEC: 5.0 V
battery cut-off: 55%
Product Functions
• Battery Management System
Built in Battery Management System function of the speed controller. Power cut off calculation based on the cells
number.
The factory default is 55% of discharge protection for Li-Polymer / Ni-MH/ NiCd, battery management system in the
electronic speed controllers. The battery management system allows you to protect your batteries from over dischar-
ge, and moreover to extend the lifetime of your batteries.
• Fuzzy Motor Timing
The auto timing allows you to maximize the performance of your motor output.
• Brake Mode
There were 2 options in brake function that allow you to choose from no brake and soft brake.
option.
• Thermal Protection (Built in function, set-up free)
The electronics speed controller adapts high temperature cut off protection.
If the controller reaches 120°C during operation, the power will be forced to cut off.