Command Description - Memco Avire Guide D'installation

SMS Remote Configuration and Management of the 2G GSM
The GSM can be configured remotely and send status information via SMS to a list of authorised users.
Two types of authorised user profile can be configured:
• Up to 4 users who have permission to configure and request information messages from the 2G GSM
• Up to 4 users who can receive SMS information messages from the 2G GSM.
NOTE: If no numbers are set to configure then any user can remotely manage the 2G GSM
Configuration of the Authorised User List
The authorised user list can be setup by sending the following SMS to the 2G GSM unit:
*1 # ID # conf1 , conf2 , conf3 , conf4 # dest1 , dest2 , dest3 , dest4
Command
*1
#
ID
#
conf1
,
conf2
,
conf3
,
conf4
#
dest1
,
dest2
,
dest3
,
dest4
Notes: All telephone numbers must have the international prefix e.g. +44 for UK
Example configuration message (two users):
*1#2GLIFT#+447987654321,+447123456789#+447987654321,+447123456789
Configuration acknowledgement messages
When the GSM has received a message it will check if the message is from the list of authorised numbers.
• If the message is from an unauthorised number then it will be ignored
• If the message is from an authorised number, and is correctly formatted, then a message reading 'ACK' will be
received
• If the message is from an authorised number, and is incorrectly formatted, then a message 'NACK' will be received
All the messages from the GSM start with an index number followed by a #. This index number starts at 0 and will
increase to 255 before resetting to 0. This will reset if the GSM is powered down.
Example of successful configuration message:
2 # *1 2GLIFT # ACK
Description
Configuration message start
Separator
GSM ID - maximum 8 alphanumeric characters - Default: 2GLIFT
Separator
Number enabled to configure GSM
Separator
Number enabled to configure GSM
Separator
Number enabled to configure GSM
Separator
Number enabled to configure GSM
Separator
Number enabled to receive messages from GSM
Separator
Number enabled to receive messages from GSM
Separator
Number enabled to receive messages from GSM
Separator
Number enabled to receive messages from GSM