Dometic GROUP Waeco CoolAir CA850S Notice De Montage page 37

Technical data
6.3.6 Menu level 5: Temperature unit display
The system can display the room temperature in °C or °F. This parameter
can be configured:
➤ Start configuration mode (see Chapter "Starting and ending configu-
ration mode" on page 33).
✓ The first digit of the display (fig. 7 on page 5, item 5) shows the menu
level and the second and third show the parameter which can be set.
➤ Press the + (fig. 7 on page 5, item 6) four times to switch to menu
level 5.
➤ Press the Operating Mode button (fig. 7 on page 5, item 4) to
change the parameters.
✓ The digits in the display flash until the parameter you entered is con-
firmed.
➤ Use the + and – buttons (fig. 7 on page 5, item 6 and 7) to select the
temperature unit that the system should display.
➤ Press the Operating Mode button (fig. 7 on page 5, item 4) to con-
firm your entry.
✓ The set value is saved and is then used when the unit is restarted.
✓ You are now in menu level 5 again and can use the + and – buttons to
switch between menu levels.
7 Technical data
Item number
Cooling capacity:
Rated input voltage:
Input voltage range:
Current consumption:
Low voltage shutdown:
Dimensions (L x B x H in mm)
(height above vehicle roof):
Weight:
Versions, technical modifications and delivery options reserved.
Air conditioning roof unit
CoolAir CA850S
9100100027
850 W
24 V DC
20 V DC – 30 V DC
12 – 22 A
Configurable (see Chapter "Menu level 2: Low
voltage cut-off" on page 34)
635 x 830 x 165
approx. 21 kg
CoolAir
37