Ferroli ENERGY TOP B 80 Instructions D'utilisation, D'installation Et D'entretien page 71

ENERGY TOP B
Position the manifolds on the previously fixed brackets (fig. 43) and fix them using the
special clamps (fig. 44).
Fix the trap (fig. 45).
fig. 43
fig. 44
fig. 45
cod. 3541G011 - Rev. 00 - 07/2015
Insert the fume dampers (fig. 46), loosening screw "D", and correctly fit them on the fume
manifold. Then tighten screw "D" (fig. 47).
3.6 Condensate drain
B
The boiler has an internal condensate drain trap connected to an internal con-
densate outlet manifold.
Condensate outlet connection using one generator
fig. 48 - Condensate drain connection with one generator
A Place the Ø40 pipe 1 (not supplied) on the side of the generator.
B Slide the pipe 2 towards the arrow side at least 2-3 cm in order to insert it in the
pipe 1.
fig. 46
fig. 47
1
1
A
EN
B
71