Battery Test - Power Fist 8382954 Manuel D'utilisateur

8382954
Rating System *CCA
CCA
SAE
EN
IEC
DIN
*For JIS, use the conversion table on the back of the unit.
8. Press the
will appear.
9. Continue with step 3 in BATTERY TEST.

BATTERY TEST

1. If testing in-vehicle, make sure all vehicle loads (lights, etc.) are off and
the key is removed. Connect the tester clamps to the battery: red to
positive (+), black to negative (-). Rock each clamp back and forth to
make a good connection.
2. The battery rating system last selected will appear on the display for
3 seconds, then the default rating value. (To change the rating system,
follow the steps in SELECTING THE RATING SYSTEM).
3. Use the
4. Press the
5. One or more top-panel LEDs (green, green and yellow, or red) will light
to indicate the battery's condition. The display will alternate between the
voltage and available power.
For technical questions call: 1-800-665-8685
Battery Tester with Electrical System Tester
Increment
20
20
20
10
10
button to select the rating system. The default rating
buttons to scroll to the battery's rating.
button.
Default Range
500 200 to 850
600 200 to 900
600 200 to 900
280 120 to 550
280 120 to 550
V 2.0
5