AL-KO 2000i Mode D'emploi page 21

„ Observe maximum cable length when using exten-
sion cords or a mobile power distribution cabinet
Observe maximum cable length when using
extension cords or a mobile power distribution
cabinet
for 1.5 mm max. 60m
2
for 2.5 mm max. 100 m
2
Refuelling
The machine must be refuelled prior to start-up.
Warning - Danger of fire!
Petrol and oil are highly flammable!
Operating material
Petrol
Regular petrol /
Grade
unleaded
4 L
Filling
amount
Safety
Warning!
Never run the engine in enclosed spaces. Danger
of poisoning!
„ Use only designed containers to store petrol and oil
„ Add and empty petrol and oil outdoors only with the
engine cooled down
„ Do not add petrol or oil with the engine running
„ Do not overfill tank (petrol expands)
„ Do not smoke when refuelling
„ Do not open the tank cap when the engine is run-
ning or hot
„ Replace the tank or tank cap if damaged
„ Always close the tank lid firmlyIf petrol has leaked
out:
Do not start the engine
„
Avoid start attempts
„
Clean the machine
„
Have engine cool down before refilling with
„
petrol to avoid spilling
478 067_e
Engine oil
SAE 10W-30
0.35 L
Spilled fuel can lead to damage to plastic parts.
„
Immediately wipe off fuel. Warranty does not
cover damage to plastic parts caused by fuel
„ If engine oil has leaked out:
Do not start the engine
„
Absorb leaked engine oil using an oil binding
„
agent or cloth and dispose properly
Clean the machine
„
Do not dispose of waste oil:
„ in domestic waste
„ by pouring it into the canalisation, drain,
or onto the ground
Drop off waste oil in a closed container at a recycling
centre or a customer service centre.
Refuelling
Filling with petrol (
Important – Danger of explosion!
Do not smoke and no naked flames when
handling petrol
1. Unscrew the fuel tank lid.
2. Fill with petrol via a funnel.
only fill up to the red line (
„
max. filling level (
„
3. Clean and tightly close the tank filling opening.
Filling with engine oil
1. Place machine on an even horizontal surface
2. Unscrew screws (
3. Remove engine cover (
4. Unscrew the oil filling lid and store it in a clean
place. (
4/1)
5. Fill with engine oil via a funnel (
Observe maximum filling level (
6. Clean and tightly close the oil filling lid.
7. Insert and tighten engine cover
2)
2/1)
2/2)
(
4)
3/1)
3/2)
5).
6)
GB
21