Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Model:
8056640
Voltage:
120V-60Hz
Amperage:
0.8A
No load speed :
12,000 OPM
Sanding sheet size:
5-1/2" x 5-1/2" x 3-1/8"
ImPOrTANT SAFETy PrECAUTIONS
warnInG! read and understand all instructions before using this tool. Keep this
manual for the safety warnings and precautions, operating, inspection and maintenance
instructions. when using this tool, basic precautions should always be followed to reduce
the risk of personal injury and/or damage to the equipment.
wOrK area
1.
Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2.
Operate in a safe work environment. Do not use machines or power tools in damp or wet locations. Do not
expose to rain. Do not use power tools in the presence of flammable gases or liquids.
3.
Keep children, bystanders and visitors away from the work area. Do not let them handle tools or extension
cords. No one should be in the work area if they are not wearing suitable protective equipment.
4.
store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock
up tools and keep them out of reach of children.
PersOnal safety
1.
use eye, breathing and ear protection. Always wear ANSI approved impact safety goggles. Wear a dust
mask or respirator when working around metal or wood dusts. Wear ANSI approved earplugs.
2.
Do not over reach; keep proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
3.
Dress properly, wear protective equipment. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Tie back long hair.
4.
stay alert, watch what you are doing and use your common sense. Do not operate any machine or tool
when you are tired, under the influence of drugs, alcohol or medications.
5.
use clamps or other practical ways to secure and support the work piece to a stable platform. Holding
the work piece by hand or against your body is unstable and may lead to loss of control.
for any technical questions, please call 1-800-665-8685
Palm Detail
Sander Kit
2
8056640
Publicité
Table des Matières
