Remote Control - Haier LE32F2220 Mode D'emploi

YPbPr CC MTS VGA
DTV
TV AV HDMI
STRENGTH
CH LIST EPG FAV
DISPLAY
S.M
VOL CH
P.M
1: POWER
Press to power ON/OFF (standby) the TV.
2: NUMBER KEY
Press to enter the TV channel number and select a channel
(Press " " to choose the sub-channel).
3:
Press to display the on screen display (OSD) menu or
return to the previous menu.
4: CURSOR
When the OSD menu is displayed on-screen, use these
buttons as the up, down, left, right and ENTER buttons to
adjust the various options in the OSD menu.
5: EXIT
Press to exit the OSD menu.
6: VOL+/-
Press VOL+ or VOL- to adjust the volume.
7: P.M
Press repeatedly to select a picture mode.
8:
Press to display or exit the TV input source menu.
9: MUTE
Press to switch the sound ON/OFF.
10: RECALL
Press to switch between the current and previously
viewed channel.
11: ENTER
Press to confirm a selection.
12: TV DISPLAY
Press to show the information about the current input source.
13: S.M
Press repeatedly to switch audio modes.
TV
14: CH+/CH-
Press CH+ or CH- to browse through the TV channels.
15: ASPECT
Press to change the picture aspect ratio.
16: CH LIST
To display the channel list. Press to display the channel list.
In DVD mode, press to eject the disc.
17: EPG
Press to display the DTV Electronic Program Guide.
In DVD mode, press to go to the previous chapter.
18: FAV
Press to display the favorite channels list. In DVD mode,
press to go to the next chapter.
19: HDMI
Press to go directly to the HDMI input source.
20: AV
Press to go directly to the AV input source.
21: DTV STRENGTH
Press to display the DTV signal strength.
22: TV
Press to go directly to the TV input source.
23: YPbPr
Press hot key to go directly to the Component (YPbPr) input source.
24: CC
Press to turn on or off the closed captions.
25: VGA
Press hot key to go directly to the VGA input source.
26: MTS
Press to activate the NTSC TV sounds, such as Stereo,
SAP or Mono tone, and audio languages of DTV.
27: COLOR KEYS
Reserved keys
-10-

REMOTE CONTROL