Using - Westfalia 82 29 91 Instructions Originales

Using

1. Install the desired brush attachment on the brush holder (4). Turn the
attachment a quarter turn clockwise to lock it in its position. Do not use
force.
2. Remove the battery compartment cap (1)
from the housing of the power cleaning
brush and open the battery compartment.
Insert the battery (5), as pictured, into the
battery compartment and close the battery
compartment with the cap.
3. Press the On/Off Switch to start the
cleaning brush.
Note:
Do not use the power cleaning brush on loose or thin cement as this could
cause damage. Take particular care when using the hard brush attach-
ment. Test the brush on an inconspicuous area before use to avoid
scratches.
Operation
16