Allen + Roth 1142VA-36-201 Mode D'emploi page 5

VANITY INSTALLATION INSTRUCTIONS
4. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess adhesive before allowing
to dry.
1328VB-48-242
5. To remove drawer preassembled in vanity (A).
Fully extend drawer, locate plastic levers on
metal glide tracks at left and right sides of
drawer box, push on plastic levers on both
sides at the same time, to disengage drawer
box from the glides, Then gently lift the drawer
up to remove it from vanity (A).
2026VA-36-200
4
C
A
5
B
A
5
1
B