Motorline professional PMLN5393 Mode D'emploi page 11

Table 3: Troubleshooting (Continued)
LED
Indication
Charger shuts off to
prevent overheating of
battery.
Blinking Red
(4 Hz)
Poor connection between
the Desktop Charging
Tray and battery contacts.
No input power.
LED Off
Incorrect battery used for
charging.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks
or registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners.
© 2008 and 2022 Motorola Solutions, Inc. All rights reserved.
Reason
9
Solution
Allow battery to cool down
(approximately 30 mins) to
5 – 40 °C. Unplug and reconnect
power to charger input.
Remove input power, clean
contacts and reinsert battery.
Check the power supply
connection to the wall electric
outlet or try different wall plug.
Charge recommended battery
only. (See Table 1).