Warming Plate - GE G7CDAASSTSS Manuel D'utilisation

Using the Glass Carafe Drip Coffee Maker
Descale (Cleaning) Mode
alert you to descale every 80 brew cycles. When it's time to
descale, a Descale icon will light on the control display.
B. To begin descaling, press and hold the 1-4 Cups button for 2
seconds to enter descale mode. Descaling can be completed
any time, even when the machine does not prompt you to do so
C. Fill the tank with water and descaler to the max level as indicated
on the water gauge (the ratio of water and descaler is 4:1, refer
to the instructions on the descaler. Please use "household
descaler". You may also use citric acid (vinegar) instead of
descaler. (If using citric acid, the ratio of water to citric acid is 100
parts water to 3 parts citric acid).
D. Place the carafe under the brew basket.
E. Press Brew/Cancel to begin the descaling cycle.
F. In the Descale mode, the heater will operate until the water is
empty.
H. Refill the tank with plain water.
I. Turn on the appliance and run the brew cycle until the water tank
is completely empty.
J. Rinse by running the brew cycle with plain water at least 3 times.
K. NOTE: The Descale cycle will run until all water from the
reservoir has been used. If the Brew/Cancel button is pushed
in the middle of a Descale cycle, the machine will exit Descale
mode, but the Descale indicator on the control display will
remain lit until a full Descale cycle is completed.
and the machine will exit Descale Mode.

Warming Plate

A. The warming plate will automatically turn on when a brew
cycle completes. The Hotplate ON icon will remain lit until the
B. The warming plate will remain on for 2 hours before
Plate Time)
ended, press the Brew/Cancel button.
D. Both warming plate temperature and time can be adjusted at
any time during the 2 hour warming period.
Adjust Warming Plate Time
A. The default warming plate time is 2 hours.
B. To adjust the warming plate time, press and hold the Left
arrow button for 2 seconds. The machine will enter a warming
plate time adjustment mode.
C. The warming plate time can be adjusted in whole hour
increments from 1 to 4 hours. Use the arrow buttons to
navigate to the desired time selection.
D. The machine will automatically accept the newly adjusted time
period after 3 seconds of inactivity.
E. To check the current warming time setting, push the Left arrow
button once.
F. If a new time period is set in the middle of an existing warming
period, the new time period will replace the previously set
period. Push and hold the Left arrow button to set a new
warming time.
49-9000045 Rev. 2
Descale
G. NOTE: If the Brew/Cancel button is pressed in the middle of
warming plate time adjustment, the machine will exit the time
adjustment mode, and return to the standard operating mode.
Adjust Warming Plate Temperature
A. The Hotplate ON icon will remain lit until the warming plate
B. To adjust the temperature of the warming plate, press and hold
the Right Arrow Button for 2 seconds to enter warming plate
temperature adjustment mode.
C. Use the left and right arrow buttons to navigate between 3
temperature options: 1-Low, 2-Medium, or 3-High.
D. The machine will automatically accept the new warming plate
temperature setting after 3 seconds of inactivity.
E. If a new warming plate temperature is set during warming
mode, the machine will accept the new temperature and use it
for the remainder of the warming time period.
F. NOTE: If the Brew/Cancel button is pressed in the middle
of warming plate temperature adjustment, the machine will
exit the temperature adjustment mode, maintain the currently
set warming plate temperature, and return to the standard
operating mode.
Delay Brew Mode (Auto Brew)
Delay Brew button to enter the delay brew mode.
B. Using the arrow buttons, select the desired hour for the future
brew cycle. Once completed, press the Hour/Min button again
to switch to minutes.Using the arrow buttons, select the desired
minute for the future brew cycle.
C. Use the left and right arrow buttons to navigate between AM
or PM. Once AM/PM is chosen, press the Hour/Min button to
program brew time next.
D. Press the Delay Brew button to complete Delay Brew setup.
New settings will also be saved after 15 seconds of inactivity.
E. Pressing Brew/Cancel during Delay Brew setup will cancel the
setup process and exit Delay Brew Mode.
F. Once successfully setup, the Delay Brew icon will light on the
control display. Once a Delay Brew program is set, pressing
Delay Brew again will cancel the active Delay Brew program,
but settings will be saved and used as the starting point for the
next Delay Brew setup.
G. NOTE: When Delay Brew is set and active, if the Brew/Cancel
button is pressed, the Delay Brew program will be canceled,
and the machine will begin brewing under standard operation.
H. NOTE: Auto brew will start when the machine clock reaches
the Delay Brew set time. The Delay Brew ON icon will remain
lit on the control display until the programmed brew cycle
completes. Once the brew cycle is complete, the Delay Brew
ON
I. NOTE: To interrupt the brewing process at any time, press the
Brew/Cancel button, then remove the electrical plug from the
wall outlet.
7