GE G7CDAASSTSS Manuel D'utilisation page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Glass Carafe Drip Coffee Maker
Before Use
• FOR HOUSEHOLD USE ONLY.
material and clean the main unit and all accessories.
we recommend cleaning the main unit and all accessories to
• To assemble the Charcoal Filter:
from the brew basket.
closure is secured.
7. Filter installation is complete.
NOTE:
three months.
How to Use
water (20-25°C) and pour into the water reservoir at the back
of the unit. The stepped water level indicator can be easily
viewed inside the unit to help aid with water level accuracy.
IMPORTANT: Before brewing, always check to make sure the
water level is past the MIN line and add water if needed. Never
exceed the MAX
NOTE:
amount of water placed into the water reservoir; as much as 10%
2. Place the empty carafe on the warming plate.
6. After powering on, press Brew/Cancel once. The Brew/
Cancel
brewing.
7. When brewing, pressing Brew/Cancel again will cancel the
time before the brew cycle is canceled, and brewing stops.
enter a "keep warm" mode, turning on the warming plate in
automatically after 2 hours.
6
Set the clock
A. Press the Hour/Min. button to enter clock setting mode. The
default of "12:00AM" will be displayed upon initial plug-in.
B. Program the hour of day using the left and right arrow buttons.
Once complete, press the Hour/Min. button again to change to
programming Minutes.
C. Now program minutes by using the left and right arrows.
D. Once Hours and Minutes are programmed, press Hour/Min
again to program AM or PM. Select AM or PM and press Hour/
Min
NOTE: if the Brew/Cancel button is pressed in the middle of
programming a new time, the new time will be discarded, and the
previous clock time will be displayed.
NOTE: While setting the clock, if there is no button press for 15
seconds, the machine will accept the current displayed time as the
new time, and exit clock setting mode.
NOTE:
setup mode.
Function selection:
A.
: Press the Brew/Cancel button to start
cycle.
NOTE: While brewing, all display and function buttons are
unavailable until brewing completes.
B. Bold Brew Mode
Bold Brew prior to starting a brew cycle. Press Bold Brew
programming to start a Bold Brew cycle.
C. 1-4 Cups Brew Mode: For smaller batch brewing, press the
1-4 Cups button
NOTE: Both the Bold Brew and 1-4 Cups setting can be on at
the same time. Simply press both buttons and then press Brew/
Cancel to start a bolder, small batch brew. Pressing Brew/Cancel
again will cancel the brew cycle.
Brew/Cancel after
49-9000045 Rev. 2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

G7cdabsstss

Table des Matières