Filter Replacement - Sharper Image PURIFY 3 Guide De L'utilisateur

FILTER REPLACEMENT

GENUINE SHARPER IMAGE FILTERS ARE RECOMMENDED
Peak performance is only realized when genuine Sharper Image Carbon and
HEPA filters are used. Others may claim to be compatible with Sharper Image
units, but the Sharper Image Air Purifier is calibrated to achieve a 99.97% capture
rate of particles 0.3 microns or larger, only when used with Sharper Image Filters.
HOW TO REPLACE YOUR FILTERS
1. Turn off and unplug unit.
2. Pull the front panel away from unit.
3. Remove the Permanent Pre-Filter by pulling on the center. You may need to
flex the Permanent Pre-Filter slightly to release the tabs at the sides.
4. Take hold of the Activated Carbon Filter at any place along the perimeter and
remove.
5. To remove the HEPA Filter, take hold of one of the pull tabs and pull to release.
6. Remove and discard used Filters. Replace with genuine filters.
7. Gently press around the perimeter of the HEPA Filter to ensure secure
placement.
14 English
l'assistance.
Cet appareil numérique de classe B est conforme à la norme
canadienne ICES-003.
Les changements ou modifications non expressément approuvés par
la partie responsable de la conformité peuvent annuler l'autorité de
l'utilisateur à utiliser l'équipement.
Déclaration de conformité FCC du fournisseur
Identifiant unique: Sharper Image Modèle PURIFY 3
Partie responsable: Vornado Air LLC
Adresse postale: 415 E. 13th St., Andover, KS 67002
Contact: www.sihomecomfort.com
CONSERVER CES INSTRUCTIONS
Français 43