PROLUMIA ROCKDISC III Manuel D'utilisation page 16

OPTIONAL OUTPUT BRIGHTNESS
The fixture can be set at 2 or 3 different light levels.
The switch can be found on the LED driver and can be seen when you have removed the light unit.
ON
Rockdisc III Mini
2 choices of
output brightness
ON Rockdisc III
3 choices of
output brightness
OPTIONAL COLOR TEMPERATURE
The fixture can be set at 2 different light colours.
The switch is located on the inside of the light unit and is accessible after opening the fixture.
REPLACING LED MODULE AND LED DRIVER
Please note: The LED driver in this fixture is not suitable for use without the presence of a load. Before working on the fixture,
cut off the mains power first.
Replaceable light source (LED only)
by a qualified technician.
16
1
I ON 100%
II - 50%
1 2
I ON ON 100%
II ON - 65%
III - - 45%
Light unit
www.prolumia.com
Base
Replaceable LED driver
by a qualified technician.