Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS - MATRIX FLOOD
LIGHT ENGINE ASSY
WITH SEALED FRAME
TEMPERED GLASS
NOTES:
For replacement LED Assemblies and Drivers please contact Hubbell Lighting for any replacement parts.
Contact your local distributor or agent to confirm parts availability prior to ordering replacement parts.
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
SAVE THESE INSTRUCTIONS
SITESYNC
(OPTIONAL)
LIGHT ENGINE ASSEMBLY
WITH SEALED FRAME
TEMPERED GLASS
DRIVER ACCESS DOOR
WIRING ACCESS COVER
The Matrix Flood Light uses a common fixture housing
assembly that consists of a center driver box, access
door, and two wings that house the light engines.
These traits are common on all versions of the Matrix
Area family of fixtures.
Your Matrix fixture, the LEDs and drivers used on this
fixture are designed to provide many years of efficient,
maintenance free, high-performance lighting. It is
possible that some components may fail during the
projected life of the fixture and need to be replaced.
Hubbell has available replacement light engine
assemblies, drivers, and surge protectors in the event
of a failure.
These illustrations shows the typical components
(standard and optional) that you may have on your
Matrix Flood fixture.
•
Light Engines (2)
•
Drivers (1 or 2) located inside of driver access door.
•
Surge Protector (1-2) located inside of driver access
door.
•
Sitesync control system (Optional)
•
Button Photocell located on top of fixture. (Optional)
Additional Options: (Not Shown)
•
Louvers - molded silicone louvers mount over the
light engines inside of the sealed tempered glass
lens frame (2).
•
Visors - Visors fasten onto glass lens frame
BUTTON PHOTOCELL
(PCU)
www.hubbelloutdoor.com
SHEET 2 OF 4
Publicité
