Cleaning And Care - Crate&Barrel District Mode D'emploi

District
3 Cube Case / Cas du 3 cube / Estuche de 3 cubos
WARNING
!
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent tipover:
• Install all tipover restraints provided with your product
• Place heaviest items in the lower drawers
• Do not set TVs or other heavy objects on top of this product
• Never allow children to climb or hang on drawers, doors, or shelves
• Never open more than one drawer at a time
Use of tipover restraints may only reduce, but will not eliminate, the risk of tipover.
Safety Mounting Instructions:
1. Using a screwdriver and screws provided, secure mounting plate(s) to the back of the product.
2. While making note of the product location and the location of the product's anti-tip mounting plate(s), mark on
the wall the position for pilot holes for the wall mounting plate(s).
3. Drill pilot holes into marked positions and into a wall stud; note if a wall stud(s) is not available, drill holes slightly
smaller than drywall anchor and insert each anchor until flush with the wall.
4. Using a screwdriver and screws provided, secure mounting plate(s) to the wall stud or drywall anchors.
5. Position product in final location, and secure to the wall by lacing one end of plastic tie(s) through both the wall
and product mounting plates, and through the other end of the tie, pulling tightly to remove slack.

Cleaning and Care:

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
800.967.6696 | crateandbarrel.com
Made in Indonesia - r03 9/11