Publicité
Les langues disponibles
Les langues disponibles
4
Check the System LEDs
1.
Verify basic wireless controller operation by checking the system
LEDs. When operating normally, the Power LED should be on
green and the Status LED should be either on blue or blinking
when the device is booting up.
5
Make Initial Configuration Changes
1
1.
Connect a PC to the wireless controller's console port using the
included console cable.
2.
Configure the PC's serial port: 9600 bps, 8 characters, no
parity, one stop bit, 8 data bits, and no flow control.
3.
Log in to the command-line interface (CLI) using terminal
emulator software. No username or password is required.
Note:
For further wireless controller configuration
information, refer to the CLI Command Reference, which is on
the Edgecore web site, www.edge-core.com.
6
Connect Network Cables
2
1.
For the 1000BASE-T RJ-45 ports, connect 100-ohm Category 5,
5e or better twisted-pair cable.
2.
For the SFP slots, first install SFP transceivers and then connect
fiber optic cabling to the transceiver ports. The following
transceivers are supported:
◆
1000BASE-SX (ET4201-SX)
◆
1000BASE-LX (ET4201-LX)
◆
1000BASE-ZX (ET4201-ZX)
◆
1000BASE-LHX (ET4201-LHX)
3.
As connections are made, check the port status LEDs to be sure
the links are valid.
■
On/Blinking Green — Port has a valid link. Blinking
indicates network activity.
1
3
1
Hardware Specifications
Switch Chassis
Size (WxDxH)
42.6 x 27.0 x 4.4 cm (16.8 x 10.6 x 1.7 in.)
Weight
2.64 kg (5.81 lb)
Temperature
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 70 °C (-4 °F to 158 °F)
Humidity
Operating: 10% to 90% (non-condensing)
Interfaces
Network
Ports 3-10: RJ-45 10/100/1000BASE-T
Ports 1-2 RJ-45 10/100/1000BASE-T or SFP
USB
1 USB 3.0
Console
RS-232 serial, RJ-45 port
Power
AC Input
100-240 VAC 50-60 Hz 2.5 A
Power Consumption 65 Watts Maximum
Maximum Current
0.9 A
Regulatory Compliances
Emissions
CE Mark
EN 55032, Class A
EN 61000-3-2, Class A
EN 61000-3-3
FCC Class A
CNS 13438
47 CPR FCC Part 15:2016, Subpart B, Class A
ANSI C63.4:2014
CISPR 32.2015 + COR1:2016, Class A
AS/NZS CISPR 32:2015, Class A
Canada Std. ICES-003:2016 Issue 6, Class A
VCCI-CISPR 32:2016, Class A
Immunity
IEC 61000-4-2/3/4/5/6/8/11
Safety
IEC 60950-1& EN60950-1
IEC 62368-1 & EN 62368-1
UL 62368-1 & CSA 62368-1
BSMI Safety Standard CNS14336-1
CCC GB 4943.1-2011
Taiwan RoHS
CNS 15663
– 2 –
Quick Start Guide
Publicité
