Medline Guardian G1-501LWX1 Manuel D'instructions page 3

NOTE: If any of the parts are missing, DO NOT use,
contact Medline at 1-800-MEDLINE | 1-800-268-2848
Seat Frame Assembly (1)
■
Armrest Frame Assembly L (1)
■
Armrest Frame Assembly R (1)
■
Backrest Assembly (1)
■
M6 Screw (12)
■
Curved Washer (12)
■
(Figure 1)
1. Place Seat Frame Assembly between the Armrest Frame
Assembly L and Armrest Frame Assembly R. Insert
one M6 screw through the frame and secure with a
curved washer and M6 nut. Repeat until the Seat Frame
Assembly is fully secured onto the Armrest Frame
Assemblies; a total of 8 screws, 8 curved washers and 8
nuts will be utilized. (Figure 2)
2. Place the Backrest Assembly behind the Armrest Frame
Assemblies. Insert one M6 screw through the Armrest
Frame Assembly and secure with a curved washer and
M6 nut. Repeat until the Backrest Assembly is fully
secured onto the Armrest Frame Assemblies; a total of
4 screws, 4 curved washers and 4 nuts will be utilized.
(Figure 3)
3. Place the Bucket, Splashguard and Bucket Lid on the
Seat Frame Assembly. (Figure 4)
4. Place the Seat and Lid onto the Seat Frame Assembly.
Ensure each clip snaps into place. (Figure 5)
5. Before use, lock the wheels by pushing down on the
brake tab on each wheel. Pull up on the brake tab to
release when needed.
Maintenance
Periodic visual inspection of this commode is recommended
to ensure that all parts and hardware are secure, that
components are in good working order and not worn,
torn, frayed, or loose, and that there are no obstructions
or impediments to normal, safe operation. If any part or
mechanism appears to be unsafe or damaged, do not use the
product. If you experience problems, please contact Medline
at 1-800-MEDLINE | 1-800-268-2848.
M6 Nut (12)
■
Seat (1)
■
Lid (1)
■
Bucket Lid (1)
■
Splash Guard (1)
■
Bucket (1)
■
1-800-MEDLINE (633-5463) | medline.com 3
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
1
2
3
4
5