Tripp-Lite UPB-10K0-1U1CQ Manuel De L'utilisateur page 7

Wireless Device Charging Instructions
Notes:
• Before charging your devices for the first time, first fully charge the power
bank.
• Phone cases thicker than 5 mm may result in slower charging speeds.
• Magnetic or metal attachments will prevent charging.
• Compatible with Apple iPhone XS Max/XR/XS/X/8/8 Plus and Samsung
Galaxy S10/S10 Plus/S10E/S9/S9 Plus/S8/S8 Plus/Note 9/Note 8/S7/
S7 Edge/S6 Edge Plus/Note 5.
1. To enable wireless charging, press the power button located
on the side of the power bank. The LEDs will then illuminate to
indicate the power bank's remaining battery capacity. The Smart
LED will turn solid red.
2. Place your Qi-compatible device on the wireless charging bank.
Notes:
• If no device is placed on the wireless charging pad after 15 seconds, the
unit will automatically turn off.
• Both USB ports will be inoperable when wireless charging is enabled. The
USB-C port will only support an input to charge on the power bank.
7